Sealed Enclosure for the GT504/514 For Roof Mounting

Our PETG Sealed enclosure is designed to block UV rays from the GT500 series devices.
Protecting the unit from harmful rays and whether to extend the life of the device. 

When installing the GT500 series devices. We recommend having a heating source present.

Step1. Clean the area the device will be installed at. Remove any dirt and oil present. Then lightly heat the area with a heat gun or torch being careful not to get to hot. Place the GT500 Series device with its VHB tape and press hard to adhere the device. Once the device is placed. Remove the VHB tape cover from the sealed enclosure. Before placing it over the GT500 series device, Heat around the edge on the outside of the device for several seconds. This can help make sure the sealed enclosure can bend and stick to the roof its being mounted on. Place the device over the top of your GT500 series device and press firmly and make sure all sides of the sealed enclosure are in contact with the trailer roof. Press and hold for 2-5 minutes.